****** - Verified Buyer
4.5
It was a nightmare to assemble I won’t lie it took a stupid amount of time m. However it does look nice for a print on particle board. I would recommend assembly in one complete go, I had taken a break and the weight of one part bearing without the rest did cause a crack in one board.As I mentioned it’s a lovely piece. I love the color. The height and the width is what I wanted. I like the size of the drawers it has a significant amount of room.This Piece of furniture was a doozy! If you’re not that handy please do not attempt. If you don’t have patience and get frustrated rather quickly please do not attempt. If you’re doing this solo be worn that this can take up to 6-8 hours. It is much more ideal to have two people. It’s not that is insanely difficult but rather very repetitive. There are so many things that have to be screwed in many of times. Many dowels have to be put in place as well. You will have to put the tracks on the draws yourself. For everything to look even and not crooked please use a leveler. As some people have mentioned At times some of the pre drilled holes do not match up. It is mentioned that you should use a screwdriver but I find that difficult because your hands and fingers start to hurt if you are doing all these steps repeatedly. I suggest using a electric cordless screwdriver. At the end of the day I’m satisfied with my purchase. Was it tiring… Yes but the end result was worth it.Where to start, lol. First off in the end of putting this dresser together I was pretty proud of my self because I put 90% of it together on my own but with the need of help for 2 of the steps my husband step in. Looking at the reviews i felt ify to buy but I couldnt pass up the price since the main company is selling it for almost $400. It took me about a lil over 3 1/2 hours to finish, and some of the pre-drilled holes are off a bit just an FYI. I did see some reviews about the drawers being off set, not shutting right so I really suggest a leveler when you screw in the main slider parts. And you might end up creating a new hole an inch or so from the pre-drilled ones you just want to make sure they match each other when placed and screwed in I really suggest to double check and level it to avoid drawer issues. The material details may say its wood, BUT its ply wood I attached a picture where you can see it, even though they may have pre-drilled holes, as I was screwing in the sides of the little drawers together, the screws weren't going in straight and going off to the side to mess up the ply wood and that was frustrating, my husband had to make new holes. The instructions tell you not to use a drill but doing this by hand can hurt after a while or maybe it was just me but using a drill towards the end of a screw being in and not at full speed or anything but it can help to tighten the screws in place. Put together its really nice, my pictures were taken at night so the drawer color looks a bit darker, its actually a lighter color, pretty simular to the images you see. You pay for what you get at a cheaper price and well I'm sure I'm not the only person on a budget here. But to be honest I was pretty satisfied after I put it all together its do-able and looks nice once put together, it fits well with the theme I'm going for in our room.I like the finished dresser but getting to that point was total hell. It is impossible for a normal person to put this together correctly, I had to ask the smartest person I know to do it. I tried for a week several hours a day, but my friend did it in a couple of hours.Looks great once assembled. Seems relatively sturdy. Barnwood type finish actually feels more like paint and looks passably realistic. It’s rough but not like real barnwood (which is good because it will be easier to keep clean). Be prepared for a tedious IKEA-like assembly. Would have been very hard on the hands without a power drill. Instructions actually say NOT to use one but...why? Drawers were a little challenging to slide in the first time but it’s like they needed to be cleared out with one pass and now open and close easily. One of the drawer fronts had screw holes drilled about 1/4” off so the drawer was unable to close as it overlapped the neighboring drawer. Was able to flip the drawer upside down and the four side holes now align as needed but needed to add a new dadoe and 2 more holes to connect to the drawer bottom. In all, a 30 minute fix with the right tools and knowledge but without, we would still have a missing drawer front so buyer beware. In all (once we figured out the drawer) it is a perfect mix of modern and rustic and ties a more industrial bed perfectly together with white picture frames and bedside table. We looked for months for something like this and there is nothing available in this price range that has this look and feel. Love it!Beautiful! Although assembly took some patience. When you finally put the drawers in, make sure to look carefully at them. There are left and right drawers, and it’s not stated in the instructions. If you’re using it in a child’s room, make sure to lag it to the wall. The legs make it a easy to pull/tip over.Mon conjoint est en train de monter le meuble et de constater la piètre qualité du produit. Honnêtement, c’est insultant paye 600$ pour un meuble comme ça. Et je ne parle pas de l’assemblage. Ça prend une dose de patience inimaginableMany many hours were put into assembling this product. Instructions not clear. Very very heavy.
